Inspectioneering
News

CSB Releases Final Report on the Massive 2019 Fire at the Intercontinental Terminals Company Tank Farm

U.S. Chemical Safety & Hazard Investigation Board (CSB), July 10, 2023

The U.S. Chemical Safety and Hazard Investigation Board (CSB) has released its final investigation report on the 2019 tank farm fire at the Intercontinental Terminals Company, LLC (ITC) bulk liquid storage terminal in Deer Park, Texas. The massive fire caused substantial property damage, significantly impacted the environment, and led to the issuance of several shelter-in-place orders that seriously disrupted the local community.

CSB Chairperson Steve Owens said, “This was a very large and disruptive event. The fire burned for three days, caused over 150 million dollars in property damage at the facility, put the surrounding community potentially at risk, and significantly impacted the environment. This disastrous event could have been prevented if proper safeguards had been in place at the facility.

The ITC Deer Park terminal housed over 240 aboveground storage tanks, which were used to store petrochemical liquids and gases, fuel oil, bunker oil, and distillates for various oil and chemical companies that leased the tanks from ITC.

The incident occurred just after 10:00 a.m. on March 17, 2019, when an accidental release of butane-enriched naphtha product accumulated and ignited near a large aboveground atmospheric storage tank, known as Tank 80-8. The CSB found that a circulation pump connected to Tank 80-8 failed, allowing the butane-enriched naphtha product contained in the tank to escape. The Tank 80-8 circulation pump continued to operate as the butane-enriched naphtha product released from the failed pump for roughly 30 minutes before its flammable vapors ignited, causing a fire to erupt and engulf the Tank 80-8 piping manifold. Once the fire erupted, ITC was unable to isolate or stop the release.

As a result, the fire burned, intensified, and spread to the other 14 tanks located in the same containment area. The fire burned for three days until it finally was extinguished. The fire caused substantial property damage at the ITC Deer Park terminal, including the destruction of fifteen (15) 80,000-barrel aboveground atmospheric storage tanks and their contents. Because of benzene-related air quality concerns, a shelter-in-place was issued for the entire City of Deer Park at one point, and local schools and businesses either closed or operated under modified conditions. A portion of a major highway in the area also was closed. Additionally, the secondary containment wall surrounding the tank farm partially collapsed, allowing the mixture of released hydrocarbon products, firefighting foam, and contaminated water in the containment area to release into the surrounding waterways, resulting in the closure of a seven-mile stretch of the Houston Ship Channel adjacent to the ITC Deer Park terminal, as well as several waterfront parks in Harris County and the City of LaPorte, due to the contamination.

The CSB’s final investigation report highlights the following five key safety issues:

  • Pump Mechanical Integrity. ITC did not have a formal mechanical integrity procedure to maintain the integrity of Tank-80-8 and its associated equipment, including the Tank 80-8 circulation pump.
  • Flammable Gas Detection System. Tank 80-8 was not equipped with a flammable gas detention system to warn personnel of a hazardous atmosphere resulting from loss of containment from the tank or its associated equipment.
  • Remotely Operated Emergency Isolation Valves. Tank 80-8 and other tanks in the tank farm were not equipped with remotely operated emergency isolation valves designed to mitigate process releases remotely from a safe location.
  • Tank Farm Design. Elements of the tank farm design, including tank spacing, subdivisions, engineering controls for pumps located inside the containment area, and drainage systems allowed the fire to spread to other tanks within the tank farm.
  • PSM and RMP Applicability. ITC did not apply a formal process safety management (PSM) program to Tank 80-8 because neither the OSHA PSM standard nor the EPA Risk Management Program (RMP) rule applied to the tank and its associated equipment due to exemptions contained in the regulations. 

The CSB determined that the cause of the incident was the release of flammable butane-enriched naphtha vapor from the failed Tank 80-8 circulation pump, which accumulated in the area and ignited, resulting in a fire. Contributing to the severity of the incident were the absence of a flammable gas detection system to alert the operators to the flammable mixture before it ignited approximately 30 minutes after the release began, and the absence of remotely operated emergency isolation valves to safely secure the flammable liquids in Tank 80-8 and the surrounding tanks in the tank farm.

The CSB also determined that because of gaps in relevant regulations issued by the U.S. Occupational Safety and Health Administration (OSHA) and the U.S. Environmental Protection Agency (EPA), ITC was not required to have a formal program for Tank 80-8 and its associated equipment that could have provided a process to identify and control the specific hazards that resulted in this incident.

Investigator-in-Charge Crystal Thomas said, “The CSB’s investigation found that the cause of the incident was linked to a number of safety shortcomings including the lack of an effective mechanical integrity program, tank farm design, deficient remote isolation valve capabilities, as well as a lack of a formal process safety management program for Tank 80-8.

As a result of its findings, the CSB is issuing recommendations to the company, OSHA, EPA, and a standard-setting organization to take action to address gaps linked to the identified safety issues.
 

CLICK HERE TO READ THE FINAL INVESTIGATION REPORT


About the CSB

The CSB is an independent, non-regulatory federal agency whose mission is to drive chemical safety change through independent investigations to protect people and the environment. The agency’s board members are appointed by the President and confirmed by the Senate. CSB investigations look into all aspects of chemical incidents, including physical causes such as equipment failure as well as inadequacies in regulations, industry standards, and safety management systems. The CSB does not issue citations or fines but makes safety recommendations to companies, industry organizations, labor groups, and regulatory agencies such as OSHA and EPA. For more information, please visit www.csb.gov.


Comments and Discussion

There are no comments yet.

Add a Comment

Please log in or register to participate in comments and discussions.


Inspectioneering Journal

Explore over 20 years of articles written by our team of subject matter experts.

Company Directory

Find relevant products, services, and technologies.

Training Solutions

Improve your skills in key mechanical integrity subjects.

Case Studies

Learn from the experience of others in the industry.

Integripedia

Inspectioneering's index of mechanical integrity topics – built by you.

Industry News

Stay up-to-date with the latest inspection and asset integrity management news.

Blog

Read short articles and insights authored by industry experts.

Expert Interviews

Inspectioneering's archive of interviews with industry subject matter experts.

Event Calendar

Find upcoming conferences, training sessions, online events, and more.

Downloads

Downloadable eBooks, Asset Intelligence Reports, checklists, white papers, and more.

Videos & Webinars

Watch educational and informative videos directly related to your profession.

Acronyms

Commonly used asset integrity management and inspection acronyms.