Inspectioneering
News

U.S. Refiners Continue to Process More Light Crude

U.S. Energy Information Administration, October 14, 2019

The API gravity of crude oil input to U.S. refineries has generally increased, or gotten lighter, since 2011 because of changes in domestic production and imports. Regionally, refinery crude slates—or the mix of crude oil grades that a refinery is processing—have become lighter in the East Coast, Gulf Coast, and West Coast regions, and they have become slightly heavier in the Midwest and Rocky Mountain regions.

API gravity is measured as the inverse of the density of a petroleum liquid relative to water. The higher the API gravity, the lower the density of the petroleum liquid, so light oils have high API gravities. Crude oil with an API gravity greater than 38 degrees is generally considered light crude oil; crude oil with an API gravity of 22 degrees or below is considered heavy crude oil.

API gravity of U.S. refinery inputs by region (2011-2018)

The crude slate processed in refineries situated along the Gulf Coast—the region with the most refining capacity in the United States—has had the largest increase in API gravity, increasing from an average of 30.0 degrees in 2011 to an average of 32.6 degrees in 2018. The West Coast had the heaviest crude slate in 2018 at 28.2 degrees, and the East Coast had the lightest of the three regions at 34.8 degrees.

Production of increasingly lighter crude oil in the United States has contributed to the overall lightening of the crude oil slate for U.S. refiners. The fastest-growing category of domestic production has been crude oil with an API gravity greater than 40 degrees, according to data in the U.S. Energy Information Administration’s (EIA) Monthly Crude Oil and Natural Gas Production Report.

Since 2015, when EIA began collecting crude oil production data by API gravity, light crude oil production in the Lower 48 states has grown from an annual average of 4.6 million barrels per day (b/d) to 6.4 million b/d in the first seven months of 2019.

When setting crude oil slates, refiners consider logistical constraints and the cost of transportation, as well as their unique refinery configuration. For example, nearly all (more than 99% in 2018) crude oil imports to the Midwest and the Rocky Mountain regions come from Canada because of geographic proximity and existing pipeline and rail infrastructure between these regions.

Crude oil imports from Canada, which consist of mostly heavy crude oil, have increased by 67% since 2011 because of increased Canadian production. Crude oil imports from Canada have accounted for a greater share of refinery inputs in the Midwest and Rocky Mountain regions, leading to heavier refinery crude slates in these regions.

By comparison, crude oil production in Texas tends to be lighter: Texas accounted for half of crude oil production above 40 degrees API in the United States in 2018. The share of domestic crude oil in the Gulf Coast refinery crude oil slate increased from 36% in 2011 to 70% in 2018. As a result, the change in the average API gravity of crude oil processed in refineries in the Gulf Coast region was the largest increase among all regions in the United States during that period.

East Coast refineries have three ways to receive crude oil shipments, depending on which are more economical: by rail from the Midwest, by coastwise-compliant (Jones Act) tankers from the Gulf Coast, or by importing. From 2011 to 2018, the share of imported crude oil in the East Coast region decreased from 95% to 81% as the share of domestic crude oil inputs increased. Conversely, the share of imported crude oil at West Coast refineries increased from 46% in 2011 to 51% in 2018.

 

Click here to read the full article from U.S. Energy Information Administration.


Comments and Discussion

There are no comments yet.

Add a Comment

Please log in or register to participate in comments and discussions.


Inspectioneering Journal

Explore over 20 years of articles written by our team of subject matter experts.

Company Directory

Find relevant products, services, and technologies.

Job Postings

Discover job opportunities that match your skillset.

Case Studies

Learn from the experience of others in the industry.

Event Calendar

Find upcoming conferences, training sessions, online events, and more.

Industry News

Stay up-to-date with the latest inspection and asset integrity management news.

Blog

Read short articles and insights authored by industry experts.

Acronyms

Commonly used asset integrity management and inspection acronyms.

Downloads

Downloadable eBooks, Asset Intelligence Reports, checklists, white papers, and more.

Videos

Watch educational and informative videos directly related to your profession.

Expert Interviews

Inspectioneering's archive of interviews with industry subject matter experts.