Inspectioneering
News

CSB Releases New Safety Video, “Behind the Curve," on 2010 Tesoro Anacortes Refinery Accident

US Chemical Safety Board, October 28, 2014

October 28, 2014, Washington, DC – Today the U.S. Chemical Safety Board (CSB) released a safety video into the fatal April 2, 2010, explosion and fire at the Tesoro refinery in Anacortes, Washington.  The accident occurred during startup of the refinery’s “naphtha hydrotreater unit” after a maintenance shut down. A nearly 40-year-old heat exchanger violently ruptured, causing an explosion and fire that fatally injured seven workers – the largest loss of life at a U.S. refinery since 2005.

The CSB’s newly released 14-minute safety video entitled “Behind the Curve” includes a 3D animation of the events that led up to this tragic accident as well as interviews with the CSB’s investigators and chairperson. 

CSB Chairperson Dr. Rafael Moure-Eraso said, “The CSB is seriously concerned by the number of deadly refinery accidents in recent years. We have concluded that extensive improvements must be made in how refineries are regulated at the state and federal level. 

The CSB’s investigation found an immediate cause of the tragedy to be long-term, undetected High Temperature Hydrogen Attack (HTHA) of the steel equipment, which led to the vessel rupture on the day of the accident.  The CSB found the industry’s standard for determining vulnerability of equipment to HTHA, to be inadequate.  

In the video Investigator Lauren Grim discusses HTHA, stating: “High temperature hydrogen attack, or HTHA, – is a common hazard that has long been known within the petrochemical industry.  However, Tesoro engineers and corrosion experts did not believe it could occur within the heat exchanger that ultimately failed.”

The CSB’s investigation report, approved in May 2014, is one of the most extensive and complex refinery explosion investigations. The investigators also reported their findings of a substandard safety culture at Tesoro, which led to a complacent attitude toward flammable leaks and occasional fires over the years. And the CSB found that the complexity of the startup procedure typically required more than just the one outside operator. Yet operating procedures were not updated to account for the role of additional personnel during the hazardous non-routine work.

The CSB made recommendations in these areas to both the industry group, which issues guidance on HTHA, the American Petroleum Institute, as well as to Tesoro.  

Investigator Dan Tillema says, “The CSB found that if Tesoro had a strong safety culture, it would have addressed the ongoing leaks and defined a reasonable number of essential personnel for the startup activity. Had Tesoro done these things, we concluded that fewer workers would have been present on the night of the accident, and lives would have been spared.”

The CSB’s final report also recommended that the governor and legislature of the State of Washington significantly strengthen the oversight of refineries.  Specifically, the Board called on the state to require refineries to:

-    conduct more comprehensive hazard analyses and damage mechanism reviews;
-    document the effectiveness of process safeguards;
-    increase the role for worker representatives in process safety management
-    have company safety reviews examined by technically competent regulators 

Chairperson Rafael Moure-Eraso said, “Seven lives were lost at Tesoro.  It should not have happened. Companies, workers, and communities would all benefit from a more rigorous regulatory system that is focused on continuously lowering risks.”

The CSB is an independent federal agency charged with investigating industrial chemical accidents. The agency's board members are appointed by the president and confirmed by the Senate. CSB investigations look into all aspects of chemical accidents, including physical causes such as equipment failure as well as inadequacies in regulations, industry standards, and safety management systems.

The Board does not issue citations or fines but does make safety recommendations to plants, industry organizations, labor groups, and regulatory agencies such as OSHA and EPA. Visit our website, www.csb.gov.

For more information please email public@csb.gov


Comments and Discussion

Posted by Krishna Prasad Jonnalagadda on May 6, 2015
Also increase the frequency of effective... Log in or register to read the rest of this comment.

Add a Comment

Please log in or register to participate in comments and discussions.


Inspectioneering Journal

Explore over 20 years of articles written by our team of subject matter experts.

Company Directory

Find relevant products, services, and technologies.

Training Solutions

Improve your skills in key mechanical integrity subjects.

Case Studies

Learn from the experience of others in the industry.

Integripedia

Inspectioneering's index of mechanical integrity topics – built by you.

Industry News

Stay up-to-date with the latest inspection and asset integrity management news.

Blog

Read short articles and insights authored by industry experts.

Expert Interviews

Inspectioneering's archive of interviews with industry subject matter experts.

Event Calendar

Find upcoming conferences, training sessions, online events, and more.

Downloads

Downloadable eBooks, Asset Intelligence Reports, checklists, white papers, and more.

Videos & Webinars

Watch educational and informative videos directly related to your profession.

Acronyms

Commonly used asset integrity management and inspection acronyms.