Inspectioneering Journal

The Top 10 Reasons for FEMI Failures in the Hydrocarbon Process Industries

Part 1

By John Reynolds, Principal Consultant at Intertek. This article appears in the September/October 2014 issue of Inspectioneering Journal.
This article is part 1 of a 2-part series.
Part 1 | Part 2


Based on my 45+ years of experience working with fixed equipment mechanical integrity (FEMI) issues in the refining and petrochemical processing industry, this article summarizes what I believe are the top 10 reasons why pressure vessels and piping systems continue to fail, thus causing significant process safety events (e.g. explosions, fires, toxic releases, environmental damage, etc.).  This top 10 list does not include the physical cause of the failure such as corrosion, cracking, embrittlement, or the other 65+ damage mechanisms and failure modes that can afflict fixed equipment in the petroleum petrochemical industry, as those damage mechanisms and failure modes are just the final result of several other layers of protection that fail first.  Rather, this top 10 list is mostly focused on the human system failures associated with inadequate or poorly implemented management systems for FEMI.  Being aware of these human system failures and mitigating the reasons for them can substantially reduce process safety events caused by fixed equipment failures.  I caution you not to “blow this off” because you have not had any big fires, explosions, or process safety incidents lately.  They do not happen very often; but when they do, they are often major events which threaten lives, and may even threaten the sustainability of your on-going business.

The hydrocarbon process industry as a whole continues to have numerous repeat failures of pressure equipment and piping, and too many of them involve large process safety events with major asset losses, environmental damage, injuries, and fatalities, even though most of the reasons for those failures and the necessary mitigation steps are well known and documented in industry codes and standards.  Having been involved in numerous failure investigations and having read about hundreds more of them, I have come to the conclusion that there are 10 primary reasons why they continue to occur.  Certainly there are more than ten reasons and there are lots of different contributing factors, as well as root causes for each major failure, but it is my opinion that if the necessary management systems and mitigation steps for these top 10 reasons were adequately implemented and sustained at each hydrocarbon processing site, the vast majority of the these failures could have been avoided.  These top 10 issues are not standalone by themselves.  Each one is typically integrated and overlapping with the other nine; but for organizational purposes, I needed to separate them individually to highlight their importance.  So let’s get right to the meat of the issue.  Here are my top 10 primary reasons for continuing FEMI failures in the hydrocarbon process industry:

  1. Inadequate or lack of identifying and managing the highest priority FEMI risks in each process unit
  2. Inadequate or lack of comprehensive Corrosion Control Documents (CCD’s) for each process unit
  3. Inadequate or lack of a thorough, comprehensive piping inspection program
  4. Inadequate or lack of a comprehensive program for Integrity Operating Windows (IOW’s) for FEMI
  5. Inadequate or lack of a comprehensive Management of Change (MOC) process for FEMI issues
  6. Inadequate implementation of all the guidance contained in the latest editions of industry codes and standards for FEMI
  7. Inadequate or lack of comprehensive programs to learn from the bigger FEMI failures in the industry before similar failures at your site
  8. Insufficient inspection planning and not using the best available technology for nondestructive examination (NDE)
  9. Inadequate or lack of comprehensive FEMI record-keeping and data analysis
  10. Insufficient FEMI training and knowledge transfer for all those with a role in maintaining FEMI

Some might look at that list and say to themselves: “Well, we already do all of those things.”  But my point is that if each operating site wants to largely eliminate the risk of a major FEMI event at their site, then each operating site must be able to obtain an “A” grade on each of these top 10 FEMI issues; not “C’s, D’s, or worse (i.e. they need to achieve excellence in implementation, not just “compliance” or “checking the box”, whatever that is).  As many of my readers already know, those that are just seeking compliance with rules and regulations will not likely be able to achieve excellence in FEMI and will remain exposed to a serious FEMI event.  In an effort to not provide more information than you could reasonably digest in one sitting, Part 1 of this article will discuss the first 5 reasons on the list of the top 10 reasons for FEMI failures in the hydrocarbon industry.  Look out for Part 2 in an upcoming issue of Inspectioneering Journal

This content is available to registered users and subscribers

Register today to unlock this article for free.

Create your free account and get access to:

  • Unlock one premium article of your choosing per month
  • Exclusive online content, videos, and downloads
  • Insightful and actionable webinars
Interested in unlimited access? VIEW OUR SUBSCRIPTION OPTIONS

Current subscribers and registered users can log in now.

Comments and Discussion

Posted by Rajaram Chidambaram on November 10, 2014
Excellent summary. The other important factor... Log in or register to read the rest of this comment.

Add a Comment

Please log in or register to participate in comments and discussions.

Inspectioneering Journal

Explore over 20 years of articles written by our team of subject matter experts.

Company Directory

Find relevant products, services, and technologies.

Training Solutions

Improve your skills in key mechanical integrity subjects.

Case Studies

Learn from the experience of others in the industry.


Inspectioneering's index of mechanical integrity topics – built by you.

Industry News

Stay up-to-date with the latest inspection and asset integrity management news.


Read short articles and insights authored by industry experts.

Expert Interviews

Inspectioneering's archive of interviews with industry subject matter experts.

Event Calendar

Find upcoming conferences, training sessions, online events, and more.


Downloadable eBooks, Asset Intelligence Reports, checklists, white papers, and more.

Videos & Webinars

Watch educational and informative videos directly related to your profession.


Commonly used asset integrity management and inspection acronyms.